Reasons Why TP-Link Extender Firmware Update Failed
Are you facing problems upgrading the firmware of your TP-Link repeater? If yes, then walk through this write-up and learn why the TP-Link extender firmware update failed. But, before that, let us shed some light on the extender’s firmware update process. Perhaps, you are not following the correct steps.
How to Update TP-Link Extender Firmware?
One can install the latest firmware version on a TP-Link range extender by following the instructions mentioned below:
- Download the extender’s firmware file from the download center.
- After that, load a new tab on the web browser and visit tplinkrepeater.net.
- Log in to the repeater using the correct information.
- On the TP-Link setup wizard or Quick setup wizard, locate Administration.
- Click Firmware Upgrade.
- Browse the file you downloaded and upload it on the extender’s panel.
This is how you can install the latest version of the firmware on your repeater by accessing the TP Link setup wizard. Just in case you are still unable to complete the process successfully, it can be due to the following reasons.
Why You Can’t Update TP-Link Extender Firmware?
Weak Internet Connection
If you are making tweaks to the range extender’s settings, then it is necessary that you have access to a super-fast internet connection. It can be possible if you have a strong internet connection from the end of your Internet service provider. However, it won’t be sufficient if you have not established the correct connections between your devices.
With that said, have a word with your ISP and check the connection status of your devices. The cables connected to them must not be loose. Additionally, they are supposed to be intact. In case your devices are connected wirelessly, be very sure that the distance between them is not unsafe.
Incorrect Firmware File
The second reason why the TP-Link extender firmware update failed is the incorrect version of the firmware file. Perhaps, you’ve uploaded an obsolete version of the firmware. Know that the firmware of your WiFi repeater will only be updated if you’ve uploaded the correct firmware file. It must be genuine and the latest.
Besides, consider saving the extender’s firmware file at a location where it can be easily accessible. It is because uploading a file that does not contain the firmware code might brick your range extender forever. Thus, do not make the mistake of uploading the wrong firmware file no matter what happens.
These were the reasons due to which you are unable to upgrade the firmware of your range extender. We hope that you will take care of them and get success with the update process via the tplinkrepeater.net login portal.
Final Thoughts
Here, ends our guide on the reasons why the TP-Link extender firmware update failed. Considering that you’ve read the post carefully, the success will be surely yours. On the off-chance you are still facing the firmware update problem, then we recommend you to reset your range extender to the factory-set mode.