How to Fix Orbi Purple Light: Easy-to-Execute Tips

Users see their Orbi satellite flashing various colors on anonymous occasions. When the satellite is off, you can conclude that everything is fine. Just in case the LED is blue, it reveals that the satellite-router connection is good. However, there are not the Orbi satellite colors that you will notice. You might also come across the Orbi purple light.

Although purple is a beautiful color and represents creativity, still if it appears on your satellite’s Ring LED, it becomes a matter of concern. Just in case your WiFi satellite is also flashing purple, walk through the write-up.

Major Causes: Orbi Purple Light

Let’s start by unveiling the reasons causing your satellite’s ring LED to turn purple. This is to inform you that other reasons are secondary but the weak connection between your router and satellite is the main reason behind the issue.

Therefore, aim to improve the satellite-router connection first. For this, we recommend you place them within each other’s range because most of the time, the communication between them is wireless. In case you’ve created an Ethernet backhaul, be very sure that you’ve created a finger-tight connection.

Just in case doing so doesn’t help you fix the Orbi purple light issue with the satellite, then the improper placement or the restlessness of the satellite can be the culprit. To fix the issue, we recommend you have a walk through the tips mentioned below.

Tips to Fix Orbi Purple Light

Place the Satellite Properly

Is your WiFi satellite located in a room where it suffers signal interference? If yes, then relocate it right away. Keep in mind that no matter whether you’ve placed the router and satellite closer if any of these devices are unable to propagate signals, you will face issues.

Therefore, you must place your WiFi satellite away from cordless phones, televisions, aquariums, microwaves, Bluetooth speakers, etc. Apart from this, the satellite is supposed to be placed in a ventilated room. If the location is central, then it will be cherry on the top. However, we suggest you raise your satellite a little high above the ground level and away from direct heat sources.

Restart the Satellite

It is also a possibility that your satellite is overworking and hence facing issues getting an IP address from the main router. Know that the inability to get an IP address from the router can also result in Orbi pink light issue. Therefore, you must restart your satellite to get rid of the current scenario.

To restart the satellite properly, we recommend you disconnect it from the router first. Once done, power it down by pressing the Power button on your satellite. Thereafter, unplug the satellite and wait for as long as you can. Lastly, power up the satellite after connecting it to its respective wall socket and pressing the Power button to the ON position. The Orbi purple light issue might have gone now.

Sum Up

That’s what we need to say about the purple light issue with the Orbi satellite. We are now expecting that the Ring LED of your WiFi satellite is now behaving normally. In case it is not, you are suggested to reset the satellite.

The Reset button located on the satellite will help you do that. Once done, do not forget it to add to the home network so that you can get WiFi coverage throughout the entire house.