Most Common Tips to Resolve Linksys Velop Red Light Problem

There are various Linksys Velop users who have been losing their minds due to the Linksys Velop red light issue. In case you are standing in the queue, then it is suggested that you take a brisk walk through the tips that we have highlighted in this article. Once you have reached the last one, you will surely be able to eliminate the Linksys Velop red light issue in a hassle-free manner. You will also be able to use your device to its full potential.

[Resolved] Linksys Velop Red Light Problem

1.      Restart the Linksys Velop

The troubleshooting process can be started by implementing the most basic solution, which is, restarting the Linksys Velop device. For this, you need to first look for the power button, in the case the device has one, and press it, hold on for some time, then, apply pressure on the same button to turn on the device. Ensure that you wait for more than a minute amidst turning off and on your device. This will give it enough time to rest and come back stronger.

2.      Relocate the Velop Device

WiFi interference is yet another reason why the LED on your device is not blinking red in color. Interference could have been caused because of an improper location of your Velop device. You might have placed it near smart home appliances like Bluetooth speakers, baby monitors, cordless phones, washing machines, microwaves, treadmills, televisions, and much more. To prevent the signals of your device from getting blocked further, relocate it.

3.      Check the Ethernet Cable

Another thing that you can do is to check whether all the cable connections are in place. In other words, the Ethernet cable used by you to connect the devices should not be worn out or have cuts on it. In case it does, then you need to use a new one without wasting any more of your precious time. In case you want to get out the web of wires, it is recommended that you connect the networking devices with the assistance of a wireless source of connection.

4.      Eliminate the Extra Space

Is there too much distance between the child and parent node? Nodding your head in yes? Well, you have found yet another reason why you are experiencing the Linksys Velop red light issue. To make another attempt to fix it, you need to get rid of the extra distance between them to ensure that signal transmission happens seamlessly. But, at the same time, ensure that the space is not too less. Otherwise, a clash of signals can happen anytime.

5.      Reset the Linksys Device

The last troubleshooting tip to resolve the issue at hand is to reset the Linksys wireless device. In case you want to learn how the same can be done, you need to first locate the reset button on your device, and press it using an oil pin. Once the reset process comes to an end, use the Linksys Velop login credentials to set up your networking device. By the way, the admin details need to be used regardless of the method you choose to use.

Conclusion

This ends the troubleshooting article based on what can be done to resolve the Linksys Velop red light problem. If your approach towards going through the tips given above was careful, then trust us, nothing will be able to stop you from converting the status of the LED light from red to green on your device. Now, you are free to use your Linksys Velop device as much as you want without worrying about facing random technical issues related to it.