Fixing Netgear WiFi Mesh Extender EX7500 Red Light Issue

Isthe blinking red light on your Netgear WiFi mesh extender worrying you? You are on the right page. This piece of write-up is going to be of great help to you in this case. Here, we will discuss what the red light on your Netgear WiFi Mesh Range Extender EX7500 means and what needs to be done to get it fixed. But, before going forward to the reasons and troubleshooting tips, let us know the purpose of having the red light on the Netgear WiFi mesh extender. The sole reason to have it is to be aware of any malfunctioning of the device. Blinking red light on the device simply means ‘poor connection’ which occurs only when there is some hardware or software malfunctioning of the device. All we want is to see a green light which indicates ‘good connection’. There may be different reasons why the right light is on and the connection is poor. Now let’s dig deeper into the issue.

Reasons for Red Light Issue on Netgear Mesh Extender

Poor Power Supply – The first and the most obvious reason could be poor power supply. It may be the case that the Netgear WiFi mesh extender is not receiving a sufficient power supply, which is why it has a poor connection.

Incorrect Placement – Incorrect placement of the WiFi mesh extender could also be to blame for the red light. Probably, the routers and the WiFi Mesh Range Extender are placed too far from each other that they cannot communicate, resulting in the poor connectivity.

Signal Interference – There is possibility of the signal getting obstructed due to interference from other sources or devices. Other electronic devices, reflexive surfaces, metal objects, Microwave ovens, Baby Monitors, etc. could be messing with signals.

Outdated Firmware – In case, the Netgear WiFi mesh extender is running on the obsolete version of the firmware, then, there are chances of signals getting interrupted and the device showing red light.

Incorrect Netgear WiFi Mesh Extender Configuration – If the Netgear WiFi mesh range extender is not configured properly then, this might result in red light issue.

Multiple devices connected- If there are multiple devices connected to the host router then it would be difficult for the mesh extender to catch the signal from the router.

Troubleshooting Red Light Issue on Netgear Mesh Extender

Reboot Netgear WiFi Mesh Extender- This is the basic troubleshooting step that you need to perform to resolve the red light issue. Power the device off by unplugging the device from the wall socket and then waiting for some time before plugging it back and turning it on. While doing so, make sure that there are no power outages in your home and that the device is getting non-fluctuating power supply. Doing this should have helped you with issue. In case the issue still persists, then move on to next troubleshooting step.

Correct placement – Make sure that Netgear WiFi mesh extenderis correctly placed. The routers and the WiFi mesh extender should not be very far from each other. They should be able to connect and communicate with each other easily.

Avoid Signal Interference – Ensure to place theNetgearWiFi mesh range extender at a place away from the devices that may cause interference with the signal, in order to avoid any such occurrences.

Perform Netgear Firmware Update – Updating the firmware of the Netgear WiFi mesh extender should be able to resolve the issue in case the above stated tips did not work. For the update, you will need to log in to your Netgear account on the computer and download the respective firmware update for Netgear WiFi mesh extender EX7500 and follow the instructions displayed on the computer screen.

Netgear WiFi Mesh Extender Setup – Another reason for the red light which was mentioned earlier is the incorrect method of Netgear extender setup. Make sure that you have followed the correct setup process and got the configuration done properly.

Disconnect Unnecessary Devices – As stated earlier, if there are multiple devices connected to the same router, then it could be affecting the mesh extender network. Remove unnecessary devices to avoid the red light issue.

If you follow the aforementioned troubleshooting tips, then you should be able to resolve the Netgear WiFi mesh extender red light issue comfortably. We hope that we were of help and now you are going to see the green light on the Netgear device instead of the red light.