Netgear Router Not Broadcasting WiFi? Here’s the Fix!
Netgear router not broadcasting WiFi especially when you are in dire need of internet to do some online task can be annoying. So, if you are also struggling with the same and need the topmost working solutions for this issue then you are at the right place. In this guide, we have covered the best troubleshooting hacks to fix the issue you are currently experiencing. FYI, the solutions are applicable to all the Netgear router models. So whether you have done Netgear AC750 setup or any other router setup, you can simply rely on this troubleshooting guide.
Why is Netgear Router Not Broadcasting SSID?
There are a variety of reasons that may put you in a situation when you need to look for solutions for Netgear router not broadcasting WiFi. We have mentioned a few common causes below. You can go through them and understand why you have fallen into the pit of issues with your router. Knowing about the causes will help you easily fix the issue as well as help you avoid it in the future. Here are the reasons:
- Router is troubled by some technical glitches
- You have placed your router in an incorrect place
- The firmware of the router is outdated
- Wireless radios are turned off
- The router is not connected to the modem properly
- Your ISP is the culprit
- The router is not configured correctly
- The WiFi channel is congested
- WiFi interference is stopping the router from broadcasting WiFi
- There are so many devices accessing the router’s network
How to Fix the Issue?
We hope by now you know what could have caused the issue with your router. Let us help you get it fixed now. Try the hacks that have been highlighted below. But before you begin the process, contact your ISP to confirm there is no internet outage from his end.
Step 1:Reboot your Router
The very first step should be to reboot your Netgear AC750 router. This step will help you fix minor technical glitches that your router might be troubled by right now. Therefore, get closer to your router and turn it off. Do not forget to disconnect the power adapter from its respective power socket. Thereafter, remove all the cables connected to it. You need to turn your router on only after waiting for a couple of minutes. This process should help you get rid of the issue that you are facing right now. In any case, if it doesn’t then follow the next step in line.
Step 2: Relocate it
Try relocating the router now. Make sure that you haven’t:
- Placed the router on a lower shelf
- Kept it behind other furniture
- Chosen a corner or congested place for it
- Located it near other networking devices or home appliances
- Placed it away from the modem
If any of the above-given points are true then move the router now. Make sure that you choose a new place for your router keeping all the points in mind.
Step 3: Reconnect it to the Modem
In the event of choosing a wireless mode for connecting the devices, you need to make sure that the router is placed within the modem’s network range.
In case they are connected through a wired connection then the cable that you have used should be in a good condition. It should be free of cuts. Plus, the Ethernet cable should be making a solid connection between the two devices.
Step 4: Disconnect Extra devices
Since there are many devices in our homes that need an internet connection to operate, we get all of them connected to the same network. This might have happened in this case also. We want you to disconnect some extra devices and reduce the load. The easier way to do this is by changing the WiFi password. All the devices will be disconnected and then you can connect only the necessary devices to the router network.
Step 5: Turn on Wireless Radio
Has the issue been fixed? No? The Netgear router has internal WiFi radios that are turned on by default. Looks like they are turned off. You can turn them on by accessing the router settings. Use the web address routerlogin.net and reach the settings and then turn on the wireless radios. We are very sure by now you are able to access the Netgear router WiFi as it has started broadcasting WiFi.
Step 6: Update Firmware
We want you to update the firmware on your Netgear router. Follow this step no matter whether the issue is fixed or not. Download the latest firmware file for the Netgear AC750 router and install it on your router now.
Verdict
We are very hopeful that using the steps given above, the issue has been fixed. It is recommended that the firmware on the Netgear router should always be updated to the most recent version all the time to make the most out of it.